Categories
Contact Us

Zibo Jinming Glaze Co.,ltd

ADD: Boshan ceramic Industrial zone ,Zibo city,Shandong Province,China-255200

Contact: Mr.Eric.Ren

MP: +86-15275979506

Tel: +86-533-4686155

Fax: +86-533-4686169

Viber/What's App: +86-15275979506

SKype: ericjinming

www.jinmingglaze.com

Email: eric@jinmingglaze.com

Service Hotline
+86-533-4686155

News

Home > NewsContent

Full Polished Glaze Problems Raised

Zibo Jinming Glaze Co.,Ltd | Updated: Oct 18, 2017

Polished tiles is the surface of the whole body brick body polished by a kind of bright bricks, belonging to a kind of quintana brick. The surface of the polished tiles is much cleaner than the quintiles. Polished tiles are hard and wearable and are suitable for use in most indoor spaces except for toilets and kitchens. In the use of infiltration technology on the basis of polished tiles can make a variety of imitation stone, imitation wood effect.Full Polished Glaze

Polished tiles paste glue (commonly known as "polished brick"), mainly for the use of cement paste polished tiles will often appear hollowing, shedding, cracking and other issues, and specially developed a new material. The use of polished tiles can prevent these problems from occurring and the effect is more beautiful. Polished Tile is a kind of polished tiles, artificial stone, water absorption ≦ 0.5 of the plate, inside and outside the wall paste and the development of a modified tile adhesive. Has a strong cohesive force, anti-sagging performance. To avoid hollowing, shedding, cracking, pulp back tears. Has a certain waterproof and impermeable function.Full Polished Glaze

Before the construction must first check the base surface situation. Construction temperature should be used in the environment of 5 ℃ ~ 40 ℃. In the summer when the base surface temperature is too high (≥ 40 ℃) should first wet the base surface with water, so as not to affect the construction quality of glue slurry too fast. It is forbidden to mix the cement which has been dry and add water. After about 1 to 2 hours of construction, the surface of the sheet can be cleaned with a damp cloth. If the ground construction, construction completed 24 hours before entering the follow-up construction. If the polished back of the layer of oily material, it is recommended to clean and then wet paste.Full Polished Glaze